Quick answer
A replica Pasha 366396 is a copy of Cartier's Pasha line, and the reference number is the anchor for every check you make. Judge the watch on four points you can verify from photos and a short video: case measurements against the published specs, the crown cap and its chain, dial print and date position, and the movement inside. Ask for measured numbers, a macro shot of the dial, and a clip that shows the seconds hand and the date change. Pay with a method that gives you buyer protection, and keep the listing text.
Prerequisites
- Published specs for the reference: case diameter, thickness, lug width, crystal type
- Listing photos that show the caseback, crown cap, clasp, and dial in daylight
- A phone with macro mode or a 10x loupe
- Calipers, if the seller will share readings
- A written return policy and the seller's response time in writing
How to check the watch, step by step
- Pin down the reference first. Ask the seller to confirm the case size and movement type in writing before you discuss finish. Compare those numbers with the brand's published figures and note any gap above 0.5 mm.
- Check the crown cap and chain. Request a video where the seller unscrews the cap, shows the threads, and lets the cap hang on its chain. Look for clean threads, a flush seat when closed, and a chain that stays anchored at both ends.
- Read the dial with a loupe or macro shot. Check the weight and spacing of the numerals, the minute track, and the spelling of every word, including "Automatic" if the dial carries it. Confirm the date window sits where the reference places it and that the date font is centered in the cutout.
- Compare the hands. Sword hands should reach the minute track without crossing it. The seconds hand should be thin, straight, and centered on the pinion.
- Request a movement clip. A smooth sweep points to a mechanical movement. A one-tick-per-second jump points to quartz. Ask which caliber is fitted, whether it hacks, and whether the date changes at midnight or drifts past it.
- Study the caseback. Engravings should be crisp and even in depth. Reference and serial formats should match the reference, and the fastening method should match the real model, not a generic snap back.
- Inspect the bracelet and clasp. Ask whether the links are solid or folded, how sizing works, and for a close-up of the clasp engraving and the safety catch.
- Treat water resistance as unknown. A replica has no pressure test behind its rating. Keep it away from water unless a watchmaker has tested the seals.
- Confirm what the price covers. Ask about the movement, crystal, bracelet, shipping, and any service. A price far below the rest of the market points to a quartz build or a bait listing.
- Pay with protection. Use a card or platform with a dispute process, and save the listing, the chat, and the invoice.
Red flags in listings
- Stock photos pulled from other listings, with no macro shots
- No video of the crown cap, seconds hand, or date change
- "1:1" claims with no measurements attached
- Pressure to pay outside a protected platform
- A refusal to state the movement caliber
After the watch arrives
Photograph the watch before you size the bracelet, then compare the dial, crown cap, and caseback with the listing photos. Time the watch over 24 hours against a reference clock and note the drift. If the watch fails a stated spec, start the return within the window instead of asking for a repair.
Compliance note
Counterfeit trademarked goods face import restrictions in the US. Check the rules that apply to your order before you buy, and keep the transaction record.