The replica Calibre 4005 is made for buyers who want the high-beat sweep and open caseback look of a prestige automatic without paying prestige money. It pairs a self-winding movement styled after the 4005 architecture with a solid stainless steel case that holds up to everyday wear. Below is what the watch actually does, how it is finished, and how it lands at your door.
Key Features
- Automatic self-winding movement styled after the Calibre 4005 layout
- High-beat balance running at 28,800 to 36,000 vibrations per hour for a smooth seconds sweep
- Roughly 48 to 60 hours of power reserve once fully wound
- Exhibition caseback showing the decorated rotor, bridges, and blued screws
- 41 mm stainless steel case with brushed flanks and polished bevels
- Sapphire-coated crystal with anti-reflective treatment on the inner surface
- Water resistance rated for daily splashes, rain, and hand washing
- Push-button folding clasp with a quick-release strap change
Materials and Specifications
The case is cut from 316L stainless steel, the grade most commonly used for corrosion resistance in watchmaking, and finished by hand in alternating brushed and polished zones. The dial sits under a sapphire-coated crystal, and the applied indices are set with luminous compound for low-light legibility. Lug width is 20 mm, which fits most aftermarket straps, and the case measures about 12 mm thick so it slides under a shirt cuff. Timekeeping on a first copy Calibre 4005 typically lands within about plus or minus 15 seconds a day depending on wear position, winding habits, and temperature. The movement is regulated at assembly, and the rotor winds in both directions to keep the mainspring topped up during normal desk work and walking.
Shipping and Returns
Orders are packed in a protective travel pouch, boxed, and dispatched with tracking within a few business days. Every watch is checked for crown action, date change, and timekeeping before it leaves the bench. If the piece is not right for you, returns are accepted within the standard window in unworn condition with the pouch and tags, and exchanges are handled the same way. Reach out through the contact page and the team will walk you through the process.
Is the replica Calibre 4005 good for daily wear?
Yes. The steel case, sapphire-coated crystal, and splash-level water resistance handle commutes, office days, and weekends without fuss. Just avoid swimming, showers, and saunas, since the gaskets are not rated for sustained immersion.
How accurate is a first copy Calibre 4005?
Expect roughly plus or minus 15 seconds per day out of the box. Wearing it consistently keeps the mainspring wound and generally tightens the daily rate.
Does it need servicing?
A cleaning and lubrication service every three to five years keeps the movement running cleanly. If the watch starts losing time noticeably or the rotor feels rough, it is due for a check.