What Is the Replica Audemars Piguet Royal Oak 67651?
The replica Audemars Piguet Royal Oak 67651 is a first copy of the 33mm quartz Royal Oak, the small diamond-bezel model from Audemars Piguet's octagonal line. A strong replica matches four things: the 33mm case width, the slim profile, the tapisserie dial, and the diamond ring on the bezel. Weak replicas miss the size or use flat, glued stones that catch light like plastic.
Buyers pick this reference for one reason. It reads as a dress watch on a small wrist, and the steel-on-steel look works with jeans or a suit. The smaller case also means fewer parts to fake, which is why so many sellers stock it.
Key Specs of the Reference 67651
- Case: 33mm across, stainless steel or rose gold, octagonal bezel
- Bezel: gem-set ring on the original
- Movement: quartz
- Crystal: flat sapphire
- Bracelet: integrated, tapering links, folding clasp
- Water resistance: rated on the original, not guaranteed on a copy
Print those numbers. They are your checklist at the point of sale.
Why the 33mm Case Size Matters Most
Most Royal Oak replicas sold online copy the 41mm Jumbo or the 37mm mid-size. The 67651 is smaller. A seller who ships a 37mm case and calls it a 67651 is selling you the wrong watch.
Measure the case with a ruler before you accept delivery. Across the bezel it should read close to 33mm, and the thickness should stay slim, not swollen.
On a 14cm to 16cm wrist, a 33mm Royal Oak sits flat and covers the top of the wrist without overhang. On a 17cm wrist it reads small, which some buyers like and others do not.
Quartz Movement: What Replicas Get Right
The original 67651 runs on quartz, so a replica with a quartz movement is the correct match. That is rare in the copy market, where most models are built as automatics.
A quartz watch ticks once per second. If the piece you are shown has a smooth sweeping hand, it holds the wrong movement or the photos show a different reference.
Quartz keeps upkeep low: a battery change every two to three years and no service bills. Some sellers push an automatic upgrade for this model. There is nothing to upgrade.
Quality Tiers in First Copy Royal Oak 67651 Watches
Sellers split stock into tiers. The names change from shop to shop, but the gaps are the same three: the stones, the dial, and the bracelet.
- Entry tier: plated case, cubic zirconia stones pressed into the bezel, printed dial pattern, hollow bracelet links.
- Mid tier: solid 316L steel, better-cut stones, closer dial texture, real screws on the bezel, decent clasp.
- Top tier: case shape copied from a scan of the original, hand-set stones with even height, sharp tapisserie squares, bracelet with correct taper and polished bevels.
Ask which tier you are buying before you pay. A seller who cannot answer that question is a risk.
How to Inspect a Replica Royal Oak 67651 Before You Buy
- Measure the case. 33mm across, thin profile, flat case back.
- Check the bezel stones. They should sit level, with even spacing and no visible glue or gaps.
- Look at the dial. The tapisserie squares should stay crisp under a phone light, not soft or printed flat.
- Read the date. The window should sit at 3 o'clock with a clean cut edge and a font that matches the reference.
- Flex the bracelet. Links should move without rattle, and the taper should narrow toward the clasp.
- Check the clasp and crown. Engraving should be sharp, and the logo on the crown should line up straight.
- Time the seconds hand. Quartz ticks. A sweep means the wrong movement.
- Ask about water. Assume no rating on a copy and keep it away from pools and showers.
Materials, Stones, and Finish
Case steel comes as 316L or 904L. The 904L alloy takes a brighter polish and resists marks better, and top-tier sellers use it. Gold-tone copies are plated, so the color can wear through on the clasp and crown edges with heavy use.
Bezel stones on replicas are cubic zirconia, moissanite, or lab-grown diamonds. Moissanite throws more fire than CZ and holds up over years. Ask for the stone type in writing, because listings blur the three.
Finish is where the money shows. Look at the bevels on the bezel and the bracelet links: brushed surfaces should stay brushed and polished surfaces should be mirror-flat, with a hard line between them.
What Do Replica Royal Oak 67651 Watches Cost?
Prices sit in bands that follow the tiers. Entry copies sell for the price of a cheap fashion watch, mid-tier versions land in the low hundreds, and top-tier pieces with hand-set stones reach several hundred dollars.
Check what the price includes: extra links, a tool, a box, and a stated return window. A low price with no returns is not a bargain.
No replica holds value. Treat the money as spent on a wearable item, not an asset.
Care and Everyday Use
Wipe the case and bracelet with a soft cloth after wear to clear skin oils and grit. Grit between links is what causes rattles and scratches. Keep the watch away from perfume, sunscreen, and hairspray, which attack plated finishes and stone settings.
Have the battery changed by someone who works on small watches. A tool slip on a 33mm case is hard to hide.
Store it on a soft surface. Do not drop it loose in a drawer with keys and coins.
The Short Version
- Confirm the 33mm case before anything else.
- Insist on a quartz movement.
- Get the stone type and the tier in writing.
- Assume no water resistance.
- Buy only from a seller with a stated return window.
FAQ About the Replica Royal Oak 67651
Is the replica Royal Oak 67651 a quartz watch?
It should be. The original reference runs on quartz, so the correct copy ticks once per second. A sweeping seconds hand points to the wrong movement inside.
What wrist size fits a 33mm Royal Oak?
A 33mm case suits wrists from about 13cm to 17cm. Smaller wrists get a clean fit, while larger wrists get a piece that reads as a dress watch.
Can I swim with a first copy Royal Oak 67651?
No. Copies are not pressure-tested, and the gaskets on budget builds are thin. Keep it dry.
How can I tell a top-tier copy from a mid-tier one?
Start at the bezel. Hand-set stones sit level and throw light from every angle, while machine-set stones look flat from the side. Then check the bracelet taper and the sharpness of the bezel bevels.