A fake Pasha two tone is a replica of the Cartier Pasha watch built with a steel case and gold-tone details on the bezel, crown cap, and bracelet. First copy versions sell for about $60 to $400, run on quartz or automatic movements, and differ from each other in plating thickness, dial printing, and case finish.
What Does Two Tone Mean on a Pasha Replica?
Two tone means the watch mixes two metal colors: silver steel plus yellow or rose gold tone. On the Pasha, the gold shows up on the bezel ring, the screw-down crown cap, and the center links of the bracelet.
The gold layer is plating, not solid gold. Good first copy builds use 3 to 5 microns of gold over 316L stainless steel. Thin plating shows copper underneath after a few months of wear.
- Bezel ring: gold tone, polished on most builds
- Crown cap: gold tone with a small chain link detail
- Bracelet: steel frame with gold-tone center links
- Dial: silver with gold-tone markers or subdial rings
What Should You Check Before Buying a Fake Pasha Two Tone?
Case Size and Shape
Pasha cases come in 35mm, 38mm, 41mm, and 42mm. A 41mm sits well on wrists from 6.5 to 7.5 inches, while 35mm suits smaller wrists and dress wear. Check the lugs: on the Pasha they sit flat and take a screw bar, not a spring bar.
Plating Type and Thickness
PVD coating holds color longer than electroplating. Ask the seller for the micron rating before you pay. Anything under 3 microns will rub off at the crown and clasp within a year.
Movement
Quartz versions cost less and never need winding. Automatic versions use a Miyota or Seiko NH-series movement, or a clone of a Swiss caliber. A smooth sweeping seconds hand tells you the watch is mechanical.
Dial, Crystal, and Hands
Look for the grid pattern on the dial, markers that sit level, and a date window that lines up with the opening. Sapphire crystal resists scratches, while mineral glass picks up marks fast.
Bracelet and Clasp
Solid links feel heavier and rattle less than folded sheet links. The clasp should close with a firm click and carry an engraving that matches the caseback.
How Much Do First Copy Pasha Two Tone Watches Cost?
- $60 to $120: quartz movement, mineral glass, thin plating
- $120 to $250: Japanese automatic, sapphire glass, 3 to 5 micron plating
- $250 to $400: clone Swiss movement, solid links, heavier gold layer
Price tracks three things: the movement, the crystal, and the plating. A cheap quartz build with thick plating often outlasts a costly automatic with thin gold.
How Long Does the Gold Tone Last?
Gold plating on a two tone replica lasts 6 months to 3 years with daily wear. Sweat, perfume, and hand sanitizer all speed up the fade.
Wipe the watch with a soft cloth after wear, keep it away from chemicals, and store it in a dry box. A local jeweler can replate the case and bracelet for $40 to $90.
Quartz or Automatic: Which Movement to Pick?
Pick quartz if you want low upkeep and a light watch. Pick automatic if you want a sweeping hand and the feel of a mechanical movement.
Automatics need service every 3 to 5 years, and that service can cost more than the watch itself. Quartz needs a battery change every 1 to 2 years, which runs $5 to $15.
Water Resistance and Daily Wear
Most replicas carry a 3ATM or 5ATM rating on paper. Treat that as splash protection only. Take the watch off before swimming, showering, or washing dishes.
If the caseback gasket looks thin or dry, assume no water protection at all.
How to Spot a Poor Build in Photos
- Gold tone that reads flat orange instead of warm yellow
- Bezel screws that sit crooked or stand proud of the surface
- Dial text that is blurry or spaced wrong
- End links that do not sit flush against the case
- Listings that hide the clasp and caseback
A seller who photographs the crown, clasp, and caseback has nothing to hide. Listings with one dial shot at an angle are a risk.
Two Tone vs Steel vs Full Gold
Steel versions hide wear best because scratches blend into the metal. Two tone watches show every nick on the gold, so they need more care. Full gold-tone replicas fade across a larger surface and look worn sooner.
Fit and Sizing Tips
Measure your wrist with a tape before you order. A 41mm Pasha on a 6-inch wrist looks oversized, and a 35mm on a 7.5-inch wrist looks small.
Bracelet links on first copy Pashas come in standard sizes, and most sellers include a link tool. Budget $10 to $20 for a sizing job at a local shop if you would rather not do it yourself.
Frequently Asked Questions
Is a fake Pasha two tone waterproof?
No. Even with a 5ATM label, replica seals are not tested to the same standard as a mainstream brand. Keep it dry.
Do two tone replicas fade?
Yes. Gold plating wears at the crown, clasp, and bracelet edges first. PVD coatings hold color longer than electroplated finishes.
What is the best size for a Pasha two tone?
41mm fits most adults. Choose 35mm for a dress look or a small wrist, and 42mm only if your wrist is over 7 inches.
Can a jeweler replate a replica?
Most can. The job takes one to two weeks and costs less than a new watch.
What to Ask the Seller Before You Pay
Ask for the micron rating, the movement name, and the crystal type in writing. Ask whether the links are solid or folded, and whether extra links come with the watch.
Buy the plating and the movement, not the listing photos. Those two parts decide how the watch looks after a year on your wrist.