The top pick for most buyers searching fake Pasha 366394 is a stainless steel Pasha-style first copy with a working screw-down crown cap and chain, a sapphire or high-grade mineral crystal, and an automatic movement under a display back. That setup wins on the details that decide whether a Pasha copy reads well on the wrist: the crown cap, the Vendome lug shape, dial print alignment, and case-flank finishing. The sections below compare it against the quartz versions, the oversized cases, and the plated two-tone builds, using the same five checks for each.

What 366394 usually means in a listing

Some listings use 366394 as a case-back stamp, others as a catalog number for one batch. Either way it is a seller-side identifier, not a factory-format reference. Cartier references for the Pasha line follow a different alphanumeric pattern, and the same 366394 stamp appears on watches with different movements, plating thickness, and crystals. Treat the number as a starting point for questions, not as proof of a grade.

The five checks that decide quality

  1. Crown cap. The Pasha is defined by a screw-down cap on a small chain. On cheaper copies the cap is decorative and the crown underneath is a push-pull stub.
  2. Lugs. Vendome lugs should curve into the case without a visible seam or a sharp step where the two meet.
  3. Dial. Numeral and index printing should sit square to the chapter ring, and any grille overlay should line up with the markers underneath it.
  4. Crystal and case. Look for even brushing on the flanks, polished bevels that run in a straight line, and a crystal that does not distort the dial edge.
  5. Movement and service. A smooth sweeping seconds hand points to a real automatic. Ask what happens if the watch stops running.

Top pick: screw-cap automatic in steel

Pros

  • Functional crown cap, so the signature Pasha detail works instead of sitting there as decoration.
  • Automatic movement gives the sweep and the case-back view that most buyers want.
  • Steel case and bracelet take scratches and refinishing far better than plated metal.
  • Easiest of the three builds to size and service locally.

Cons

  • Heaviest and thickest option, which shows under a tight cuff.
  • Costs more than the quartz builds and can run slow if it is never serviced.
  • Case thickness is the detail most likely to give the watch away in a side-by-side comparison.

Use case: daily wear, office use, and anyone who wants the crown cap to actually screw down. This is the version to buy if the watch will be worn often and handled.

Runner-up: quartz grille-dial version

Pros

  • Thinner case that sits closer to the proportions of the real 35 mm and 41 mm Pasha sizes.
  • Lower cost, so a second dial color becomes affordable.
  • No winding, no service interval, and it keeps time well out of the box.

Cons

  • Ticking seconds hand is an instant tell to anyone who knows watches.
  • Grille overlays on cheap builds are often misaligned with the markers.
  • Case backs are usually solid, so the movement is not visible.

Use case: occasional wear, a gift, or a first Pasha-style purchase where budget matters more than the movement.

Budget option: plated two-tone case

Pros

  • Warm two-tone look at the lowest entry point.
  • Usually available in the larger case size that sells best.

Cons

  • Plating wears through at the clasp, crown cap, and lug edges within months of daily wear.
  • Color match between the plating and the bracelet is often off by a shade.
  • Resale and repair options are close to zero.

Use case: a dress watch worn a few times a month, kept dry, and stored in a pouch.

Sizing and fit

The Pasha has been offered in sizes around 35 mm and 41 mm, and copies often run one or two millimeters larger than the size label suggests. Measure your wrist and compare the listed case diameter plus thickness, not the diameter alone. Bracelet links on the screw-cap builds are usually removable with a small screwdriver, while the plated builds often use pin-and-collar links that need a push tool.

Before you pay

  • Ask for a photo of the crown cap unscrewed, with the chain visible.
  • Ask for a straight-on dial shot to check print alignment.
  • Ask which movement is inside, and whether the case back opens with a wrench or snaps off.
  • Confirm the return window and whether refinished or worn watches can be sent back.
  • Pay with a method that can be reversed if the watch does not match the photos.

Legal and practical notes for US buyers

Goods that carry a copied trademark can be seized at import by US Customs and Border Protection, and sellers marketing them as the real thing can face deceptive advertising rules. That risk sits with the shipment, so a watch that clears customs today can still be stopped on a later order. Keep the purchase small, keep the listing photos and order confirmation, and understand that no first copy carries a factory warranty or authorized service.

Quick decision

  • Want the crown cap to work and plan to wear it weekly: steel screw-cap automatic.
  • Want the correct thin profile and a low price: quartz grille-dial.
  • Want the two-tone look for occasional dress use: plated case, stored dry.